Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
$9.99
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action.
- 2pcs IGUS self lubricating bushing
- 2pcs O-ring
- 2pcs stainless shim washer
$9.99
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness.
- 28pcs rear load pins
- 16pcs front load pins
- Tool included
$18.00
X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK Easy cleats provide a 13° angle of disengagement and allow for multidirectional release.
- Compatibility: X-Track and Geo Trekking Collection, SPD compatible
- Material: Premium Steel
- Clip out direction: Multidirectional
- Clip in: 30% easier
- Angle of Disengagement: 13°
- Lateral Adjustment: 2mm
- Angular Adjustment: 1°
- Weight (pair): 45g
$49.99
Widen your Q-factor to 57mm.
- Long spindles are 5mm longer than standard.
- The kit includes: 1 pair long spindles + refresh kit (Enduro cartridge bearings, igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool).
- Compatible with: Eggbeater, Candy, Mallet, 5050, Double shot, model years 2010-present
- Weight: 112g per pair
- Spindle material: forged SCM 435 chromoly steel
- Q-factor: 57mm
$29.99
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy.
Pedal Refresh Kit includes:
-Enduro catridge bearings
- Igus LL-glide bearings
- Double seal system (internal and external seals)
- Hex alloy end caps
- O-rings
- Nuts
- Sleeve bushings
- Bearing removal tool
Compatible with the following pedals (2010-present):
- Eggbeaters
- Candys
- Mallets
- 5050s
$26.99
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.
- SPD compatibility
- Weight (pair): 30g
- Float: 6 degrees
- Release angle: 15 or 20 degrees
$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
- Sold in pairs
$40.00
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals.
- Chromoly spindles
- Sealed cartridge bearing and bushing in an alloy cartridge
- Compatible only with iSSi Road pedals
- Installs with iSSi Road spindle tool (TL5499)
- Pedal Spindle: 9/16"
- Spindle Material: Chromoly Steel
$50.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options.
Includes:
- iSSi chromoly spindles
- Sealed cartridge outer bearings
- Inner Bushings
- Spindle nuts
- Seals
- iSSi-branded end caps
$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit.
- Includes 36 steel pins and 2mm spacers to replace both sides of two pedals
- The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
$25.00
Xpedo XPR cleat set for R-FORCE 6 is an SPD style cleat specifically designed for 3-hole road shoes.
- Weight: 135g per set with hardware
- Float: 6°
$17.10
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$22.00
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float).
- Fits VP and Look Keo pedals (pedals sold separately)
$23.00
- The ATAC 13/17° cleat works with all TIME mountain pedals.
- Included with all mountain pedal models numbered "6" and higher
- Release angles of 13 degrees or 17 degrees depending on how the cleat is set up on the shoe
- Compatible with all two-hole cycling shoes.
$23.00
- The ATAC EASY 10° cleat works with all TIME mountain pedals.
- Included with mountain pedal models numbered "2" and "4."
- Release angle of 10 degrees and is compatible with all two-hole cycling shoes.
- Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.
$23.00
- Works with all XPRO and XPRESSO pedals.
- Not included with new XPRO and XPRESSO pedals.
- This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle.
- Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
$23.00
- Developed for the TIME XPRO & XPRESSO road bike pedal range.
- They allow angular and lateral freedom in order to respect the natural movements of your legs and joints.
- You can also adjust the Q-factor (by switching the cleats)
- The Bi-material brings more durability when walking with the cleats.
- These cleats are the stock cleats included with all XPRO & XPRESSO pedals.
$21.99
- Compatible with all Spike & Oozy Pedals
- Full Complement Sealed Bearing x 2pcs
- Green Silicone Friction Seals
- Replacement inboard bearings for your SPIKE or OOZY pedals.
$23.95
Official replacement cleats for Ritchey mountain bike pedals.
- Includes a pair of cleats and mounting hardware
- Compatible with Ritchey Pro-V4 and V5 mountain clipless pedals
$21.95
- Cleats to fit Ritchey Echelon and Look Keo clipless pedals
- Includes a pair of cleats and hardware
$39.99
Problem Solvers Deckster pedal adapters. Converts SPD-compatible pedals to platform pedals for casual cruising.
- Works with 2-bolt, SPD-style cleats, such as Time, Shimano, Crank Brothers, Wellgo and others. Not compatible with Speedplay
- Cleats not included
- 85 x 95 x 10mm platform
- Hardware included, cleats not included
$51.00
The Blade Kit for the Keo Blade Carbon range is compatible with ceramic and Ti models. It allows you to replace the original blade or change the tension of your pedals to fit your requirements. 3 different tensions are available: 12 for standard use, 16 for sprinters and a recommended 20 for track cycling.
Page 1 of 3
Next page